It’s a Polarized lens so it eliminates glare. It’s also a Photochromic lens, meaning it lightens and darkens automatically to suit the light conditions. These two lens technologies offer the greatest advantages, so we’ve packed them into one.

Our PolarPhoto lenses are made using an injection process that ensures they’re optically correct, decreasing eye fatigue and increasing comfort. At all tint levels—from the lightest to the darkest—RYDERS PolarPhoto lenses provide protection against 100% UVA, UVB, UVC and harmful blue light to 400nm.

When exposed to sunlight, the lenses will start to darken instantly. The time they take to reach maximum darkness depends on a number of factors including the intensity of sunlight and air temperature. Generally speaking, the adjustment from light to dark is quite rapid. If sunlight intensity gradually changes, the lenses will gradually change with it. If the intensity suddenly drops off, the lenses will start to change instantly but the adjustment from dark to light is slightly slower than the rapid adjustment from light to dark.


Where there is light there is always glare. It’s caused when light hits a surface, becomes concentrated, then reflects into your eyes. Polar-photo lenses eliminate glare from horizontal surfaces [roads, water, ice, snow, etc.] allowing details to show through, drastically reducing eye strain.







It’s important to note that most car windshields block the UV light that’s needed for the Photochromic reaction to take place. For this reason, you should not expect the tint of the lenses to darken while driving in bright conditions.

Light conditions are constantly changing. Time of day, weather, or simply a change in location or direction of travel will alter the intensity of the sunlight that’s reaching your eyes. Photochromic lenses automatically adjust to suit the amount of sunlight at any given time.

Our Photochromic lenses are made using an injection process that ensures they’re optically correct, decreasing eye fatigue and increasing comfort. At all tint levels — from the lightest to the darkest — RYDERS Photochromic lenses provide protection against 100% UVA, UVB, UVC and harmful blue light to 400nm.

When exposed to sunlight, the lenses will start to darken instantly. The time they take to reach maximum darkness depends on a number of factors including the intensity of sunlight and air temperature. Generally speaking, the adjustment from light to dark is quite rapid. The adjustment from dark to light will begin instantly but occur more gradually.

It’s important to note that most car windshields block the UV light that’s needed for the Photochromic reaction to take place. For this reason, you should not expect the tint of the lenses to darken while driving in bright conditions.

Where there is light there is always glare. It’s caused when light hits a surface, becomes concentrated, then reflects into your eyes. Polarized lenses eliminate glare from horizontal surfaces [roads, water, ice, snow, etc.] allowing details to show through, drastically reducing eye strain.

Our Polarized lenses are made using an injection process that ensures they’re optically correct, decreasing eye fatigue and increasing comfort. As with all of our lenses, RYDERS Polarized lenses provide protection against 100% UVA, UVB, UVC and harmful blue light to 400nm.

LIGHT CONDITIONS: designed for medium to very bright, glaring light

POLARIZING EFFECT: eliminates glare, significantly increasing definition and depth perception

PHOTOCHROMIC EFFECT: automatically adjusts from light to dark and vice versa to suit light conditions

COLOUR EFFECT: darkens colours without changing hue or contrast

VISIBLE LIGHT TRANSMISSION: 34% – 12%, category 2 – 3

UV PROTECTION: 100% UVA, UVB, UVC and harmful blue light to 400nm

Polycarbonate is the extraordinarily durable thermoplastic that’s used in bulletproof glass, riot shields and astronaut helmets. It’s the ideal material for performance eyewear because of its high impact resistance, inherent UV protection and light weight. All of our lenses are made of polycarbonate.

All of our lenses block 100% of UVA, UVB, and UVC rays, and harmful blue light to 400nm. These harmful rays are a leading cause of cataracts, skin cancer and wrinkles around the eyes—all great reasons to block them out.

All of our lenses are shatterproof, meaning they won’t break up into dangerous little shards when impacted. An extremely strong impact may damage the lens, but it will never shatter. If astronauts trust this material to keep their heads from exploding while on a 17,000 mph space walk, you’ll have nothing to worry about on your adventures, no matter how fast you’re going.

The lenses in all of our sunglasses are made by injecting molten polycarbonate into a mold that is specially shaped to eliminate distortion. This process makes the lenses optically correct, increasing comfort and minimizing eye fatigue.

We apply a scratch-resistant coating to all of our lenses. Though this process makes the surface of the lens considerably harder than the base lens material, it’s impossible to make the lenses completely scratch proof (short of making them from diamonds) so please care for them properly as they may still scratch under certain conditions.

A Swiss technology, this thermoplastic is the material used in all of our sunglasses (with the exception of our metal frames). Its extreme flexibility, durability and light weight make it the perfect material for performance eyewear.

Hydrophilic [anti-slip] nose pads are an important feature to look for in performance eyewear. Our hydrophilic material is so effective that it actually grips better when it’s wet — exactly when it’s needed.